Genio 360(P) Evaluation Kit Quick Start Guide Overview
Genio 360(P)-EVK are the evaluation kits of the MediaTek Genio 360 SoC platform: Genio 360 EVK carries the MT8366 SoC and Genio 360P EVK carries the MT8367 SoC. The two SoCs share the same die and package, and both EVKs share the same PCB design, so a single IoT Yocto software build supports both boards.
The two SoCs differ in their CPU core count: Genio 360 integrates six cores (1x Arm Cortex-A76 + 5x Arm Cortex-A55), while Genio 360P integrates eight cores (2x Arm Cortex-A76 + 6x Arm Cortex-A55).
Apart from the processor cores, both kits share the same feature set: an Arm Mali-G57 MC2 GPU, a MediaTek NPU for AI workloads, 4GB LPDDR4X RAM and 64GB eMMC, together with a rich set of IoT interfaces including MIPI-DSI and MIPI-CSI, eDP, DisplayPort, Gigabit Ethernet, CAN FD, M.2 Wi-Fi slots and a 40-pin Raspberry Pi compatible header.
The Quick Start Guide below steps you through the process of evaluating the features of this kit.
Genio 360(P) EVK System Image
Note
IoT Yocto v26.0 supports Genio 360(P) EVK P2V3 only. Board revisions P2V1 and P2V2 are not supported, because the DSI display fails to bring up on those revisions. The board revision is printed on the bottom side of the PCB, next to the MediaTek logo.